中文 English
Shandong xiongtai machinery group co., ltd.
  • home
  • About Us
  • Product
  • Video
  • Honor
  • case
  • News
  • Contact
  • Position:Home>COMPANY NEWS

    How to maintain the portable core drilling rig daily?

    Release time:2021-6-11    This article is read 65 second

    If you want to improve the service life of the drilling rig, you should pay more attention to daily maintenance. The editor of Shandong Xiongtai Group will explain how to maintain the portable core drilling rig daily.

    The daily maintenance of the portable core drilling rig is as follows:

    (1) The daily maintenance is completed by the operator, and the original records should be filled in carefully;

    (2) The drilling rig should be cleaned as necessary before the handover of each shift. The upper and lower frame rail surfaces, vertical shafts, and pistons are often stained with mud when starting the drill. Clean these contact surfaces and add oil;

    (3) Check whether the hydraulic tank oil and gearbox oil levels are appropriate before each shift. If the oil level is found to be too low, add lubricating oil in time;

    微信圖片_20210506160946.jpg

    (4) Operators in each shift should add lubricating oil to the oil cup on the rail surface of the upper frame. Add grease to the oil cup of the clutch release shaft pump oil cup chuck beam once a month;

    (5) The operator must check the oil filter every week, and clean it immediately if it is blocked.

    (6) Hydraulic oil and gear oil for drilling rigs are generally changed depending on the oil quality. Different brands of hydraulic oil should be used in winter and summer. When changing the oil, empty the old oil, remove the iron filings from the oil tank with an iron absorption stone, and then add new oil;

    How to maintain the portable core drilling rig daily?
    The last one:Reasons for the slow drilling speed of pneumatic drilling rigs and troubleshootingNext item:Reasons for the slow drilling speed of pneumatic drilling rigs and troubleshooting

    400-0537-369

    Shandong xiongtai machinery group co. LTD
    National free sales hotline: 400-0537-369
    Seat: 0537-2339569 
    Fax: 0537-2339569
    WeChat: 15905372283
    Email address: xiongtaijx@163.com
    Address: shuyuan industrial park, qufu city, jining city, shandong province

    Mobile Station

    Copyright:Shandong xiongtai machinery group co., ltd. All rights reserved      Lu ICP 19020630 -1   公示信息

    一分七星彩